tplinkwifi.net – Login, Manage and Change Wifi Password

The tplinkwifi.net address is the universal address used for all TP-Link Routers to get the Admin Login Access Page. You can use the following button to visit the page.

Note: If you don’t see an Admin Login Page that means you are not connected with a TP-Link Router. Make Sure you are using the Router and Your PC/Laptop is connected with it.

How to Login with tplinkwifi Address?

This is as simple as using the Default Gateway IP Address for any Router, visiting the tplinkwifi.net address, and logging in with your Username and Password.

Step 1: Make Sure you are Connected with a TP-Link Router with Lan/Wifi

Step 2: Visit https://tplinkwifi.net address and Enter Your Admin Username & Password (Tip: the default Username and Password is admin)

Step 3: You are successfully logged in to the TP-Link Router Admin Panel. Now you can set up an Internet Connection, and Change your Wifi Settings.

Also Read: How to Setup TP-Link Router

Router Names and the Setup Guide are Here:

Here are some most popular Routers and their setup guide links given below. If you are facing any issues you can just visit the setup guide and solve your wifi issue

How to Setup Internet Connection using TPLinkWifi.Net?

As per the Steps above you are logged in to the Admin Page now let’s start with Setting Up the Internet Connection.

For demo help, you can visit the TP-Link Router Emulator website and experience the Admin Page without using any TP-Link Router.

You can use Quick Setup or Just go to Network >> WAN and then Setup your Internet Connection.

Note: Here, you will need a Cable Internet Connection at your place, then insert the Cable in your Router Connect Your Router with your PC and turn the Router Power ON.

Step 1: Log in to the https://tplinkwifi.net admin page.

Step 2: Go to Network >> WAN Select Connection Type (Ask your Internet Provider for this with Username and Password)

Step 3: Below that Enter Your Connection Username and Password.

Step 4: Let the Other Settings as it is and click on Connect.

Step 5: Once it shows the Connected status Click Save and Starts Using the Internet Service.